Author name: EthanWP

A barcode scanner may read a product label correctly while the workstation still calls the wrong tightening task. On a […]

Choosing between RS-485 and 0–10 V torque arm position signals starts with the receiving controller. A matching interface label is

A torque arm that works comfortably above a component may become awkward when the tool must reach a side face

A multi-point tightening workstation for engine assembly should connect every required fastener to an approved process, a reachable tool position,

Selecting a torque reaction arm by torque capacity and nominal reach alone does not guarantee that every fastener will be

If an existing tightening workstation produces acceptable torque results but still depends on operator memory to identify bolts, follow the

If the tightening result is OK, how can the operation still be wrong? An industrial tightening tool can return an

In an industrial fastening workstation, tool support normally has to address two different problems. First, the tool may be heavy

When KURAN configures a torque reaction arm for an industrial assembly workstation, we do not normally begin with a model